User friendly and low cost design
"Long distance" mode for dramaticatlly increased detecting distance
8 times^(*) wider dynamic range and 0 to 8000 scaled indication enable precise monitoring
4.5 times^(*) larger display allows easy and quick adjustment
Low power consumption

^{(*)compared with conventional Takex product}
 

RATING / PERFORMANCE / SPECIFICATION

Type	NPN output	PNP output
Model	F80R	F80RPN
Power supply	12~24VDC ±10% /Ripple 10% or less
Power consumption	650mW or less (25mA or less at 24V)	830mW or less(32mA or less at 24V)
Output mode	NPN open collector output  Rating：Sink current 100mA (30V DC) or less  Residual voltage：1V or less	PNP open collector output  Rating：Source current 100mA (30V DC) or less  Residual voltage：2V or less
Operation mode	Light ON / Dark ON selectable with sliding switch
Timer	OFF delay / disabled selectable with sliding switch
	Delay time：45ms fixed
Response time ※1	Hight speed mode : 190µs or less /  Long distance mode:1.8ms or less
Light source (wavelength)	Red LED(680nm)
Indicator	Operation indicator : orange LED / Mode indicator : yellow LED / Teaching indicator : green LED
Display	Received light level : 4 digits in orange LED (0~8000)
Switch	Output mode selector switch X1 / Timer selector switch : 1 / Teaching and sensitivity adjustment push + 4-direction button switchX1
Sensitivity setting	Full auto teaching / Auto teaching
Sensitivity adjustment function	Provided (manual sensitivity adjustment)
Protection circuit	Reverse connection protection / Short circuit protection
Material	Polycarbonate
Wiring	2m attached cable(Outer dimension : dia.3.7mm) 0.2sq. 3 cores
Weight	Approx. 60g (including 2m cable and mounting bracket)
Accessory	Mounting bracket / Operation manual

※1 For initial setting and checking, output operation is disabled for about 1.5 seconds after power-up.
      The factory setting is long-distance mode.